4.
Troubleshooting
1. After installation,
the
DVR
doesn't
work(NO
lights ON)
•
Make sure the vehicle
ACC
is
ON.
•
Make sure the power supply
is
connected correctly
and properly.
•
Check to insure that your power source
has
power.
•
Check the 1 amp fuse to insure
it
is
not blown out.
2.
The
Yellow
light
keeps flashing
•
An Invalid
I
Damaged Micro
SO
card inserted.
• There in no
SO
card
in
the unit.
•
Type
of Memory or Micro
SO
card
is
not compatible
with the DVR.
3.
The Green
light
keeps
flashing.
• The File Playback mode
is
in
progress. Press the
"ell"
button to exit.
•
Restart the vehicle, the DVR
will
start the Loop
&
Voice Recording mode
automatically.
4.
Incorrect
Date/ Time.
•
Use a monitor and correct the Time/Date setting
as per the manual.
• When the recording is in progress, turn off the
power supply to the DVR and check the Power-
off Delay function is working
or
not.
If yes, the
built-in battery is still good and you
will
adjust the
Date and Time correctly.
5.
No video
output
during
recording.
•
Make sure the external
AN
monitor is on and
the AUX
in
is connected.
• Some
in-dash A/V monitors
will
not show a
picture when driving or cannot work with two
devices connected. Apply your parking brake
and check for video. : Note this
is
only for vehicles
with
AN
input, not Audio input. Refer to your
vehicle or head unit manual for details.
6.
The video
playback
is
not
in
Color.
• The background lighting is dim
or
not bright
enough and this is normal operation in a dark
setting.
7.
The
DVR
doesn't turn
off
automatically
when
the
vehicle
is
powered
OFF 10
seconds.
•
The
white wire is connected
incorrectly
to
constant power and not to the ACC
wire of the
vehicle, please check and re-connect
it
correctly
and. properly.
•
The power outlet that you have plugged the
cigarette lighter adapter into is not shutting off.
Use another power outlet.
•
Press
RESET
button to restore the default
settings.
8.
Video
can't be
played
or
is
not
smooth when
being
played
on
external
video
players,
PC,
tablet,
etc.