EasyManua.ls Logo

Audiovox PRO9276C User Manual

Audiovox PRO9276C
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
128-8784b
1 of 28
1
Model PRO9276C
Installation Manual
Vehicle Security System
with Remote Start
Rev B: New Format Add Timing PASD & Light Blue + DBI Lock, Lock, Lock 5/2013
If booklet format, pages 26-30, Programming & Wiring Diagram shall be foldout or seperate 5 sheets
front & back.
PATENTED: www.voxxintl.com/company/patents
Table Of Contents:
Before You Begin Page 2
Wire Harnesses Quick View Page 3 - 4
Installation Of The Major Components Page 5
6 Pin Power Harness Wiring Page 6
4 Pin Alternate Ignition Harness Wiring Page 7
12 Pin Accessory Input/Output Harness Wiring Page 8 -11
5 Pin Aux Channel Output Harness Page 11 - 12
Door Lock Harness Wiring Page 13 -15
3 Pin Input/Output Harness Wiring Page 15
4 Pin Auxiliary Output Harness Wiring Page 16
2 Pin Transponder Harness Wiring Page 16 -17
Telematic Port Information Page 17
5 Pin Antenna Harness Page 17
DBI Port Information Page 17
Time Start Program Page 17-18
Diesel Engine Settings Page 18
Tach Rate Setting Page 19 & 27
Engine Monitoring Selections, (Voltage Tach, DBI, Hybrid,) Page 18 -19
Diagnostics Access & Information Page 19
Multi Coil Pack Adaptor Optional Page 19 - 20
Testing Your Installation Hood Pin Safety Page 20
Manual Override Safety Testing and Operation Page 20 - 21
Neutral Safety Switch Testing Page 21 - 23
Completing Your Installation Page 23
Programming Bank 1 Transmitters Page 24
Programming Alarm Feature Bank 2 Page 24 - 25
Programming Remote Start Feature Bank 3 Page 26 - 278
Circuit Wiring Layout Page 28
Question and Answer IconNeed help?

Do you have a question about the Audiovox PRO9276C and is the answer not in the manual?

Audiovox PRO9276C Specifications

General IconGeneral
BrandAudiovox
ModelPRO9276C
CategoryCar Alarm
LanguageEnglish

Summary

Major Component Installation Guide

Detailed Wiring Procedures

6-Pin Main Power Harness Connections

Step-by-step wiring instructions for the 6-pin main power harness.

12-Pin Accessory/Input-Output Harness Wiring

Comprehensive wiring guide for the 12-pin accessory and input/output harness.

System Configuration and Features

Engine Monitoring and Diagnostics

Methods for monitoring engine status and accessing diagnostic codes.

Programming Transmitter and Alarm Features

Procedures for programming transmitters and configuring alarm features.

Remote Start and Selectable Feature Settings

Configuration for remote start functions and detailed selectable features.

Installation Testing and Safety Checks

General Installation Testing Procedures

Steps to verify the correct operation of the installed system.

Safety Feature Verification

Testing hood pin, override, and neutral start safety functions.

Related product manuals