These instructions are specic to the AUDIOVOX VXE 7020 NAV car receiver’s software only
with the Article No. 150 8702. THE SOFTWARE IS NOT INTERCHANGEABLE WITH OTHER
MODELS.
IMPORTANT NOTES
1. Read and understand these instructions before proceeding with the software update.
2. Please follow all steps exactly in the following order! If any error occurs during the update the
unit will be damaged irreparably.
3. Do not power OFF the head unit during the software update or the head unit may become
inoperable.
4. Turn on the electrical system of the car by the ignition key without starting the engine. The
engine must not be activated during the update. Do not activate any consumers during the
update.
5. Audiovox Audio Produkte GmbH does not accept any liability for an erroneous update and as a
consequence a damage of the unit.
PREPARING A SD CARD FOR THE VXE 7020 NAV SOFTWARE UPDATE
1. Items needed to update the VXE 7020 NAV software:
- Micro SD/USB adapter; this can be purchased at any ofce supply store
- 1GB (or larger, up to 4 GB) Micro SD card
Insert the Micro SD into the adapter and plug it into your computer.
2. Format the Micro SD card using the Windows le explorer to FAT32 directly before copying all
les of the rmware to the Micro SD card!!!
Important note: Deleting all les on the Micro SD card is not the same like formatting!!!
You must use the FAT32 format for the Micro SD card!!!
DoneverusetheMicroSDcardwiththenavigationsoftwareforthermwareupdate!!!
3. Download the le “VXE7020NAV 2014-11-05.rar“ and unzip it.
4. After unzipping the le “VXE7020NAV 2014-11-05.rar“, the folder “VXE7020NAV 2014-11-05.
rar“ contents 8 les and the directory “CE4E“.
The content of the folder “VXE7020NAV 2014-11-05.rar“ (8 les and the directory “CE4E“
including all subdirectories) must be copied directly to the Micro SD card.
VXE 7020 NAV (Article-No. 150 8702) | Software update | 05 Novermber 2014
To Next Page
Loading...
Need help?
General
