What to do if there is no audio output from my Audiovox Car Navigation system?
- RRebecca MorganAug 19, 2025
If you are experiencing no or low audio output from your Audiovox Car Navigation system, there are several potential causes. First, check the wiring to ensure proper audio output connection. Next, verify that the volume is not set too low and increase it as needed. Also, review the wiring diagram to check the “MUTE” connection. Damaged speakers can also be the reason, so replace them if necessary. If the volume balance is heavily biased, adjust the channel balance to the center position. Finally, ensure that the speaker wiring is not in contact with any metal parts of the car; if it is, insulate all speaker wiring connections.