What to do if my Audiovox Receiver displays an 'ANTENNA error message'?
If your Audiovox XMB10 Receiver shows an 'ANTENNA error message', first ensure the satellite antenna is properly connected to the ANT jack on the rear panel. Also, verify the Xpress Receiver is firmly seated in the cradle mounting plate by pressing down on it to ensure the connector is firmly connected to the Boom Box connector.
How to troubleshoot no sound from Audiovox XMB10 speakers?
If there's no sound coming from your Audiovox XMB10 speakers, make sure that headphones are not plugged in. Remove them to restore sound to the speakers.
What to do if my Audiovox Receiver does not turn on?
If your Audiovox Receiver isn't turning on, first check that the receiver power is switched on using the Xpress Power On/Off button. Also, ensure that the batteries are correctly installed with the proper polarity.
What to do if my Audiovox Xpress XMB10 shows a 'NO SIGNAL' message?
If your Audiovox Receiver displays a 'NO SIGNAL' message, try changing location to eliminate nearby obstacles such as bridges, etc.
Why does my Audiovox XMB10 not operate using batteries?
The Audiovox XMB10 might not operate on batteries if the AC power connector is attached to the rear panel. Remove the power connector from the rear panel to enable battery operation.
What to do if my Audiovox Receiver has intermittent operation?
If your Audiovox Receiver is operating intermittently, the battery level may be low. Try replacing the batteries.
Unit compliance with FCC rules for residential environments regarding interference limits.
Important safety precautions for installation and usage of the Boom Box to avoid accidents or injury.
Safety guidelines to follow before installing or wiring the XMB10 Boom Box.
Steps for connecting and installing the XMB10 Boom Box kit, including antenna placement.
Overview of the physical controls and buttons on the XMB10 Boom Box.
Accepts a stereo headphone jack for private listening capability.
Accepts an audio input signal from an external audio device.
Buttons to increase or decrease the audio output volume level.
LED indicator for power status and low battery indication.
Switch to apply power to the Boom Box, activating the power LED.
Button to release the mounting plate for receiver installation/removal.
Procedure for installing 8 C-Cell batteries for independent AC power operation.
Guidance on setting up the Audiovox XMB10 by following the interconnect diagram.
Step-by-step instructions for installing the Xpress Receiver into the Boom Box mounting plate.
Instructions for properly seating the Xpress Receiver onto the mounting plate.
How to apply power to the XMB10 and ensure the Receiver turns on.
Procedure to automatically swing out and remove the Xpress Receiver from the Boom Box.
Visual guide illustrating the connections between the receiver, boom box, and power adapter.
Guidelines for placing the antenna for best reception, near a window or outdoors.
Tips for positioning the antenna on a flat surface and outdoor mounting.
Steps for plugging the antenna into the XMB10 and positioning it for optimal signal.
Guidance on receiving satellite or terrestrial signals by optimizing antenna placement.
Important notes on not cutting or splicing the antenna cable; use approved extension kits.
Adjusting antenna position for audio output and marking the best location.
Planning antenna cable routing indoors and connecting the power adapter.
Details on output power, distortion, frequency response, and impedance.
Information on headphone and auxiliary input connector types and levels.
Overall dimensions and weight of the XMB10 Boom Box and AC adapter.
Regular checks for external damage to connectors, controls, and the unit's case.
Instructions for cleaning the exterior using a damp, lint-free cloth; avoid liquid cleaners.
Troubleshooting steps for when the system does not power on.
Resolving issues related to battery operation, including connector and battery installation.
Addressing problems with low battery levels affecting operation.
Troubleshooting steps for antenna connection and receiver seating issues.
Steps to resolve 'NO SIGNAL' by checking for obstacles and antenna location.
Solution for no audio output from speakers, typically related to headphone usage.
To Next Page
General
