Audiovox VXE 7020 NAV Software Update

5. MPU update
The MPU update starts automatically after the calibration of the screen is complete.
You should see the progress bar of the MPU update.
6. MCU update
After the MPU update the following screen will appear.
Remove the Micro SD card with the software to start the MCU update.
Wait until the MCU update is completed and the device reboots.
The update is completed only after the device has been rebooted.
Audiovox Audio Produkte GmbH · Lise-Meitner-Str. 9 · 50259 Pulheim / Germany · www.audiovox.de
VXE 7020 NAV (Article-No. 150 8702) | Software update | 05 November 2014

Audiovox VXE 7020 NAV Specifications

General

Brand	Audiovox
Model	VXE 7020 NAV
Category	Receiver
Language	English