42
Vehicle Installation
strength. You can also press menu and then press to scroll to and
highlight Signal Indicator. Press
the Select button. The Satellite
and Terrestrial bars show the
strength of the signal being
received. If the signal reception is
good, press and hold menu to
return to the main display screen.
7 Ensure your radio is tuned to
channel 1. Upon power up, your
radio should tune to channel 1 by
default, when it’s not yet activated. If it’s not on channel 1, refer to the
User Guide which accompanied your radio to learn about how to tune a
channel.
8 If you haven’t done so, turn on your vehicle’s stereo system. Set it to
play input from the cassette source.
9 You should hear XM channel 1 through your vehicle’s stereo system.
Now sit back and enjoy Satellite Radio.
10 The audio level output of the radio can be increased or decreased as
necessary to match the audio levels of other sources in your vehicle.
Refer to the User Guide which accompanied your radio for instructions.
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle’s stereo system is set to the correct source, i.e., cassette source
(step 8). Also be sure that the audio level is set high enough to be heard (step 10).
Refer to “Troubleshooting” on page 52 for additional help.
Signal Indicator
To Next Page
Loading...
