54
If this happens: Try this:
Audio sounds too soft •Raise the volume of your stereo system or
increase the audio level of your radio until the
sound quality improves. Refer to the User Guide
which accompanied your radio for instructions.
Audio fades or has static when
listening
•Check all cables for a firm and secure connection.
•If you are using PowerConnect or the FMDA
to listen via your vehicle’s FM radio, and the
problem persists, it most likely is interference
from another commercial or broadcast FM
station. You will need to find an unused or
available FM channel in your area. Refer to step
5 on page 43.
•If you are using PowerConnect, and you cannot
solve the audio problem, try connecting the
audio using the Aux In Cable or a Cassette
Adapter. (Refer to page 39 and page 41.) If you
cannot use those solutions, consider using an
FM Direct Adapter. (Refer to page 45.)
No audio when using
PowerConnect or FMDA
•Check that your radio and your vehicle’s FM
radio are tuned to the same FM channel.
No song title or artist name is
displayed
•The information may not be available or updates
may be in progress.
Traffic and Weather channels
sound different from other
channels
•These channels use a different audio technology
than other channels so they often sound
different from other channels.
Troubleshooting
To Next Page
Loading...
Need help?
General
