To Next PageTo Next Page
Need help?Do you have a question about the Audison LR 132 and is the answer not in the manual?
Details the two-channel amplifiers with compact dimensions and excellent musical performances.
Essential precautions for proper installation and operation, including temperature and voltage requirements.
Guidance on mounting procedures and recommendations for using Audison cables for optimal installation.
Critical warnings regarding shielded cable connections, output grounding, and crossover filter considerations.
Instructions for physically mounting the amplifier unit, including necessary hardware.
Guidance on selecting and connecting power cables for the amplifier, including fuse holder recommendations.
Recommendations for connecting speaker cables to the amplifier's terminal block.
Information on recommended pre-in connection cables and their lengths.
Visual representation of the amplifier's internal components and signal flow.
Table detailing impedance values (Ohms) and corresponding inductance (L) and capacitance (C) for TRI-MODE connections.
Diagram illustrating the TRI-MODE system wiring configuration with fader control.
Details on voltage, idling current, and maximum consumption for the LR 52 amplifier.
Specifications for continuous, dynamic, and mono output power across different impedances and voltages.
Information on THD, bandwidth, damping factor, noise ratio, input sensitivity, and impedance.
Explains the function of the ON and SAFE indicator lights on the amplifier.
Details on selecting STEREO or MONO operation modes and their input usage.
Describes the PRE IN inputs and the LEVEL control for adjusting input sensitivity.
Overview of the amplifier's connection terminals for speakers, power, and remote control.
Details on voltage, idling current, and maximum consumption for the LR 72 amplifier.
Specifications for continuous, dynamic, and mono output power for the LR 72 across different impedances.
Information on THD, bandwidth, damping factor, noise ratio, input sensitivity, and impedance for LR 72.
Explains the function of the ON and SAFE indicator lights on the amplifier.
Details on selecting STEREO or MONO operation modes and their input usage for LR 72.
Describes the PRE IN inputs and the LEVEL control for adjusting input sensitivity.
Overview of the LR 72 amplifier's connection terminals for speakers, power, and remote control.
Details on voltage, idling current, and maximum consumption for the LR 132 amplifier.
Specifications for continuous, dynamic, and mono output power for the LR 132 across different impedances.
Information on THD, bandwidth, damping factor, noise ratio, input sensitivity, and impedance for LR 132.
Wiring diagram for active Hi-Pass and Subwoofer system configurations.
Wiring diagram for active front, rear, and subwoofer system configurations.
General
