LIVE GUITARS on INTRO 3 – ENDING 3
LIVE GUITARS on ENDING 1 – ENDING 2
KETRON • AUDYA 15
LIVE GUITARS on ENDING 1 – ENDING 2
In order to assign the Live Guitar to End1 or End 2, activate check on”Preset End1”.
If Preset End is not enabled, the End 1 will play the internal track programmed (if exists).
When PRESET_END 1 / 2 is enabled your have two options to choose:
1) Live Guitar set to NONE: on this case the Live Guitar will play automatically the template corresponding to the
Live Guitar used on the current Arranger A, B, C or D.
If on the current Arranger there’s not provided a Live Guitar, then the style will play the conventional Midi track
(is present).
2) Live Guitar set to a template different than the Live Guitar assigned to the current Arranger ABCD: on this case
the new Live Guitar set for Ending will perform its pre-programmed specific template for Ending 1 or 2, no
matter which Live Guitar is already assigned to Arrangers.
3) Most of Live Guitar are provided with templates specifically programmed for END1 and END2.
To Next Page
Loading...