Need help?Do you have a question about the August AT-6 and is the answer not in the manual?
Select location for the unit ensuring treated water can flow automatically and is accessible for inspections.
Lay wastewater pipe with suitable slope, ensure proper burial depth, and match pipe diameters to unit couplings.
Carry out earthwork according to regulations, excavate pits, ensure proper levelling on a reinforced concrete base.
Select a ventilated location for the blower, connect electric cable, ensure distance to unit does not exceed 5m.
Install controller indoors or in blower container, ensure good air circulation, and lay appropriate electric cables.
The underground part of the unit housing has a 10-year quality warranty from the date of sale or transfer.
Manufacturer will rectify defects attributable to them and perform start-up/tuning within a reasonable period.
Warranty covers defects in underground housing due to material quality or design shortcomings notified during the term.
Warranty is valid if unit is stored/transported correctly, operated per manual, installed by authorized personnel, and paid for.
Operator must notify seller of defect within 10 days and submit purchase and installation documents.
Table listing diameter, height, inlet/outlet pipe dimensions, and average electrical consumption for different unit models.
Components of the treatment process including solids bag, air distribution, blower, and airlifts.
Describes the solids bag for separating gross solids from wastewater and handling non-degradable materials.
Explains the air distribution manifold with valves for adjusting air supply to airlifts and aeration elements.
Details operations of the flow controller, blower, diffuser, and airlifts, including specific valve settings.
Guide for first run, language selection, setting date/time, and menu navigation using buttons.
Explains standard and non-standard programs (Holiday, Weekend House) and how to change them.
Details options like date/time setup, operating hours, log reading, service menu, language select, and device status.
Describes the GSM module for network sign-up, connection to service center, and automatic settings.
Steps for launching the unit, connecting components, and proper procedures for unit shutdown and cleaning.
Lists necessary periodic inspection and maintenance tasks for the unit, including frequency.
Key operational checks for solids bag, airlifts, aeration, and sludge pumping.
Explains optical alarm types (constant/flashing green/red) and their meanings, including power failure.
Details maintenance modes like sludge concentration check, sludge removal, and filter replacement with intervals.
Explains warnings like 'REPLACE FILTER' and 'CHANGE MEMBRANE' and how to confirm them.
Procedure for measuring settled sludge content and removing excess sludge to maintain optimal treatment efficiency.
Step-by-step guide for removing excess sludge, including blower shutdown and water level management.
Importance of recording all defects, maintenance, and service visits in the manual for claims.
Guidelines for safe servicing, electrical work, tool usage, hygiene, and access restrictions.
Mandatory personal and protective equipment to be used during maintenance and operation.
List of specific tools recommended for unit maintenance, such as test flasks and brushes.
Details of test report by PIA GmbH showing efficiency results for COD, BOD5, SS, NH4-N, Ntot, and Ptot.
Unique code for domestic wastewater treatment plants and their intended use for treating wastewater.
Information on the manufacturer, authorized representative, and the harmonised standard EN 12566-3.
Table of declared performances including efficiency, capacity, watertightness, and material properties.
Select location for the unit ensuring treated water can flow automatically and is accessible for inspections.
Lay wastewater pipe with suitable slope, ensure proper burial depth, and match pipe diameters to unit couplings.
Carry out earthwork according to regulations, excavate pits, ensure proper levelling on a reinforced concrete base.
Select a ventilated location for the blower, connect electric cable, ensure distance to unit does not exceed 5m.
Install controller indoors or in blower container, ensure good air circulation, and lay appropriate electric cables.
The underground part of the unit housing has a 10-year quality warranty from the date of sale or transfer.
Manufacturer will rectify defects attributable to them and perform start-up/tuning within a reasonable period.
Warranty covers defects in underground housing due to material quality or design shortcomings notified during the term.
Warranty is valid if unit is stored/transported correctly, operated per manual, installed by authorized personnel, and paid for.
Operator must notify seller of defect within 10 days and submit purchase and installation documents.
Table listing diameter, height, inlet/outlet pipe dimensions, and average electrical consumption for different unit models.
Components of the treatment process including solids bag, air distribution, blower, and airlifts.
Describes the solids bag for separating gross solids from wastewater and handling non-degradable materials.
Explains the air distribution manifold with valves for adjusting air supply to airlifts and aeration elements.
Details operations of the flow controller, blower, diffuser, and airlifts, including specific valve settings.
Guide for first run, language selection, setting date/time, and menu navigation using buttons.
Explains standard and non-standard programs (Holiday, Weekend House) and how to change them.
Details options like date/time setup, operating hours, log reading, service menu, language select, and device status.
Describes the GSM module for network sign-up, connection to service center, and automatic settings.
Steps for launching the unit, connecting components, and proper procedures for unit shutdown and cleaning.
Lists necessary periodic inspection and maintenance tasks for the unit, including frequency.
Key operational checks for solids bag, airlifts, aeration, and sludge pumping.
Explains optical alarm types (constant/flashing green/red) and their meanings, including power failure.
Details maintenance modes like sludge concentration check, sludge removal, and filter replacement with intervals.
Explains warnings like 'REPLACE FILTER' and 'CHANGE MEMBRANE' and how to confirm them.
Procedure for measuring settled sludge content and removing excess sludge to maintain optimal treatment efficiency.
Step-by-step guide for removing excess sludge, including blower shutdown and water level management.
Importance of recording all defects, maintenance, and service visits in the manual for claims.
Guidelines for safe servicing, electrical work, tool usage, hygiene, and access restrictions.
Mandatory personal and protective equipment to be used during maintenance and operation.
List of specific tools recommended for unit maintenance, such as test flasks and brushes.
Details of test report by PIA GmbH showing efficiency results for COD, BOD5, SS, NH4-N, Ntot, and Ptot.
Unique code for domestic wastewater treatment plants and their intended use for treating wastewater.
Information on the manufacturer, authorized representative, and the harmonised standard EN 12566-3.
Table of declared performances including efficiency, capacity, watertightness, and material properties.
General| Brand | August |
|---|---|
| Model | AT-6 |
| Category | Water System |
| Language | English |
To Next Page
