Aukey KM-G18 - Getting Started; Editing the Custom Lighting Effect; Notes

Getting Started
Editing the Custom Lighting Effect
Notes
Plug the USB connector of this keyboard into a USB port on your computer
or laptop
Press “Fn + Ins” / “Fn + Del” / “Fn + Home” / “Fn + End” / “Fn + Pg ” / “Fn
+ Pg ” (Fn key with one of the group of 6 keys towards the center-right
side) to select one of the 18 lighting effects. Each key combination can be
pressed repeatedly to cycle through the 3 different variations for each
lighting effect
Press “Fn + ” repeatedly to choose from the 9 colors
1.
2.
3.
Press “Fn + `~” (Fn key with the key near the top-left) twice to enter
customization mode. The 4 LED indicators at the top right of the keyboard
will flash rapidly
The flashing lighting colors of the “`~” key indicate the colors you can
choose. Press “Fn + ” repeatedly to choose the color you want
Press “Fn + `~” to save your effect
1.
2.
3.
Some lighting effects aren’t available in other colors
Press “Fn + Space bar” and each key of the keyboard will show a different
color. Press the key with the color you want to switch to that lighting color
•
•
- 04 -