Why is there no sound coming from my auna DVD Player?
If there is no sound from your auna DVD Player, ensure that the 'MUTE' button is not set to 'ON' for either the DVD player or your TV. Also, verify that the audio cable is not faulty. You may also need to change the System Audio Setup for STEREO setting, especially if you're using only 2 speakers or plugging directly into your TV unit.
What to do if auna DVD Player doesn't respond to remote control?
If your auna DVD Player is not responding to the remote control, try the following: * Remove any obstacles between the remote control and the unit. * Aim the remote control directly at the sensor on the front panel of the player. * Check the batteries in the remote and replace them if necessary.
How to fix no picture on auna MCD-82 BT DVD Player?
If you're not getting a picture from your auna DVD Player, make sure the HDMI video cable is securely connected to the output of your TV. If it's still not working, press the Video Mode button on your remote until the picture appears normal.
What to do if auna MCD-82 BT DVD Player failed to play a disc?
If your auna DVD Player is failing to play a disc, first ensure that the disc is properly inserted. You may need to clean the disc if it's dirty, and make sure it has no scratches. Also, verify that the disc is in the correct format for the player.
What to do if auna MCD-82 BT DVD Player failed to work with keys?
If your auna DVD Player fails to work with keys, shut down the unit, wait ten seconds, and then restart it. This can resolve issues caused by power surges, brown outs, or other electrical phenomena.
General| Brand | auna |
|---|---|
| Model | MCD-82 BT |
| Category | DVD Player |
| Language | English |
To Next Page