auna NR-620 - CD Playback

32
EN
CD PLAYBACK
• Set the function switch (3) to „CD/USB/SD“.
• Press „Open/Close“ (18) to open the CD compartment (10).
• Insert a CD with the printed side facing up and close the CD
compartment.
• The CD is recognized and the LCD display (2) shows the number and
playback time of all tracks.
• Press „Play/Pause/Stop“ (19) to start playback.
• To pause playback, press „Play/Pause/Stop“ (19). Press this key again to
resume playback.
• If you press „Play / Pause stop“ (19) for more than 2 seconds during
playback, playback will stop.
• Use / to skip tracks (press and hold for fast forward or rewind).
For MP3 CDs
Press „Folder up“ (6) to switch to a parent folder.
ID3 (track/album) function (via remote control)
Press „Info“ during MP3 playback to display le information, if available.
Press „Info“ again to deactivate the display.
Title/Folder name search function (via remote control)
You can search for titles by name/folder name while playback is stopped:
• Press „Find“ once, then / (16,17) to search title names in
alphabetical order and to start playback of the selected item „play/
pause/stop“ (19).
• Press „Find“ again; the folder names will be displayed. Then press
/ (16,17) to search the folder names in alphabetical order and
„play/pause/stop“ (19) to start playing the selected item.
Note: If no name is assigned to a le, „none“ or unknown“ will be shown
on the LCD display (2). The system supports Latin letters and Arabic
numerals in the ID3 text.