Aura Cebilon Platinum - Technical Data Sheet

12
SPECIFICATIONS FOR USE
The Cebilon Platinum reverse osmosis system meets the NSF/ANSI Standard 58
(US standard for point of use (POU) reverse osmosis systems (RO)) for
performance standards veried with conrmed test data.
Do not use water for this system that is microbiologically unsafe, that has
not been suciently disinfected before or after operation or that is of
unknown quality.
Cebilon Platinum reverse osmosis system contains components that need
to be replaced regularly to eciently lter the dissolved solids
(TDS) from
the water. To check the eciency of the system, check the water in the
system regularly.
Please also replace the lters according to the specied replacement
intervals.
• Water inlet pressure for systems without pressure pump (min/max):
3 - 5 bar
• Water inlet pressure for systems with pressure pump (min/max):
1 - 3 bar
• Clean water production of the reverse osmosis membrane:
75 gpd (283,4 l/d)
• Clean water tank capacity: 2.2 gallons (approx. 8 liters)
• Inlet of total dissolved
solids (TDS): max. 1250 ppm
• Average salt ltration: 97 - 98 %
• Water inlet temperature (min/max): 5 - 45 ºC
• Power supply (system with pressure pump): Input: 220 - 240 VAC
/ 50/60Hz; Output: 24 VDC / 0.8 (nom) max. 1.2 A
TECHNICAL DATA SHEET