5
7
6
8
Thermostat returns to home screen.
Testing: Set to
call for heat. Check TRV’s are opening and Boiler
Receiver is receiving the signal. Turn down the
thermostat and check TRV’s shut and boiler receiver
turns off.
Next press arrow on thermostat to start pairing
process. Do not press Confirm as it will abort
the pairing process and user will have to start again.
Press Pairing Button on TRV(s) for 10
seconds until pairing light on the TRV starts
to flash. Maximum of 6 TRV’s can be paired
at the same time.
If thermostat only finds 1 to 5 TRV’s it will
continue to search until user presses Confirm
. If the maximum 6 TRV’s are found the
thermostat will automatically finish pairing
and return to the home screen.
13
speedfitUFH.co.uk
To Next Page
Loading...
