Aura Strap 2 User Manual

AURA Strap 2 battery contact issue
Using this guide, you agree to the following terms and conditions: Terms of Use*, Terms of Sales*, and Privacy
Policy*. The guide is compiled according to AURA Devices terms and conditions information remains confidential.
Issue: Can't connect AURA Strap 2 or take a measurement.
Solution: Set the right position of the contact on the battery inside the device.
1) Remove the backward cover with the included pick.
2) Remove the battery and check your device battery contact position.

Aura Strap 2 Specifications

General

Category	Measuring Instruments
Connectivity	Bluetooth
Material	Silicone
Compatibility	Apple Watch
Sensors	Accelerometer
Measurements	Body composition
Water Resistance	Water-resistant

Summary

AURA Strap 2 Battery Contact Issue Troubleshooting

Problem Description

Inability to connect the AURA Strap 2 or take a measurement.

Solution Overview

Set the correct position of the contact on the battery inside the device.

Remove Backward Cover

Remove the backward cover using the included pick.

Remove Battery and Check Contacts

Remove the battery and check your device battery contact position.

Adjust Contact Position

Set the contact position as shown in the provided picture.

Clean Battery Contacts

Clean the contact using an alcohol napkin or a thick cloth.

Insert Battery and Reassemble

Insert the battery with positive polarity upwards and place the cover.