Offset change
Offset allows you to calibrate temperature indications with a tolerance of ± 3 °C. AURATON Libra may
for example show that the temperature in the room is 23 °C, while a regular room thermometer next
to it may show 24 °C. Changing the offset by +1 degree, will make AURATON Libra show the same
temperature as the room thermometer.
The offset change mode is signaled by a flashing OFFS. By turning the knob to the left or right, you can
set the desired value in the range from -3.0 to 3.0 (preset – 0.0). Confirm your choice by pressing the
( button. AURATON Libra will return to the normal operating mode.
IMPORTANT:
If no button is pressed for 10 seconds while changing the configuration settings,
AURATON Libra will return to the normal operating mode.
To Next Page
Loading...
