2
Congratulations on your purchase of a modern AURATON RTH receiver
installed at the heating or air-conditioning device.
Operation with load up to 16A
The AURATON RTH receiver has been equipped with the
transmitter which may work with load up to 16A. Low-spark
technology of switching the voltage system causes minimal wear
of the transmitter's contacts.
Interruption-free communication between devices.
AURATON RTH communicate on the 868MHz frequency. Very short
encrypted transmission packets (ca. 0.004s) provide efficient and
interruption-free operation of the device.
LED diodes
LED diodes inform in a clear manner about the device operating
status.
ON / OFF cycles memory algorithm
The AURATON RTH receiver is equipped with a unique algorithm of
ON- OFF cycles analysis. The whole heating cycle from the last 24h
is saved in the memory of the RTH receiver. In the case of loss of
communication with the temperature controller and/or the T-2
thermometer, the RTH receiver will automatically perform the
remembered cycle of activations / shutdowns from the last 24h. It
gives time to restore the transmission (removal of interruption) or
repair the controller and/or the T-2 thermometer without
significant thermal comfort deterioration in the controlled facility.
Basic product characteristics
To Next Page
Loading...
