- 13 -
ACS Companion Mode
If you are using an ACS as a companion or in addition to another primary Aurender server, you
will want to "merge" the library contents so that your primary Aurender's music library is based on
content stored on the ACS plus its own local storage.
1. Go to the "ACS" section of the Conductor Settings Menu
2. Tap "Select ACS to connect"
3. Follow the on-screen prompts to connect to your ACS and merge your library.
*ACS10 is configured as RAID 1 (Mirror) when released from the factory. If you want to maximize
the HDD capacity, please go to Settings>Disk Information in the ACS Manager app and click DE-
LETE RAID. All contents will be deleted and you will see two HDDs after automatic formatting.
Please refer to the Web Manual at www.aurender.com/user-guides for more information.
To Next Page
Loading...