- 17 -
As with any computer, please avoid cutting power to the Aurender before properly shutting it down.
Your Aurender needs to be shut down properly to avoid damage.
There are 2 ways to shut down or restart your Aurender:
1. Press and hold the "play" button in the Aurender Conductor app. Then there will be a pop up
where you can chosse “Restart” or “Turn off.”
Important Notice:
Improper Shut Down Can Cause Damage
2. Press and release the power button on the face of the Aurender itself. It will start to flash and on
screen it will say "shutting down...Please wait." Note: in some cases you may have to push the pow
-
er button twice: once to "wake it up" and then again to shut it down.
PLEASE DO NOT PRESS AND HOLD THE POWER BUTTON AS THIS CAUSES A FORCED
SHUT DOWN.
During the Aurender shut down sequence, the power button backlight will pulse, and the screen
will read "Shutting Down...Please Wait."
Only after the screen has gone black and the power light is dim, it is safe to flip the power switch
on the back.
Failure to shut the Aurender down properly when turning it off or rebooting can cause severe dam
-
age to the unit’s hardware.
To Next Page
Loading...