Need help?Do you have a question about the AURES Odysse II and is the answer not in the manual?
General| Brand | AURES |
|---|---|
| Model | Odysse II |
| Category | Touch terminals |
| Language | English |
Provides critical safety guidelines for operating the product safely and preventing damage.
Warns about explosion risk with incorrect battery replacement and proper disposal procedures.
Explains the hardware RAID 1 card and its automatic operation for data mirroring.
Details jumper configurations on the RAID board for RAID 1 and Clear RAID modes.
Step-by-step instructions to initialize and set up the system for RAID 1 mirroring.
Procedures to remove RAID mode from HDDs, including data erasure warning.
Guide on converting a non-RAID system to RAID 1, including backup recommendations.
Instructions for removing and replacing the Hard Disk Drive (HDD) from the system.
Steps to attach and install a second Hard Disk Drive into the system's bracket.
Detailed steps for removing and replacing the Input/Output board located in the base chassis.
Guide for removing and replacing the system's power supply unit.
Procedures for removing and replacing RAM modules and the Central Processing Unit (CPU).
Step-by-step instructions for disconnecting cables and removing the motherboard from the chassis.
Overview of the BIOS setup program for system configuration and required keyboard connection.
Steps to access the BIOS setup utility by pressing the DEL key during system startup.
Guidance on resolving boot problems by loading optimized defaults in BIOS.
Explains the primary menu options available in the BIOS setup utility.
Describes the cursor behavior when overwriting existing characters on the display.
Explains cursor movement and display scrolling in vertical scroll mode.
Details cursor movement and text scrolling behavior in horizontal scroll mode.
Command to set display mode and write strings to upper or lower lines.
To Next Page
