Need help?Do you have a question about the AURES YUNO-156 and is the answer not in the manual?
Details compliance with FCC, CE (EMC/LV), and UL standards for device safety and operation.
Provides essential safety warnings for product use, handling, and installation to prevent hazards.
Details technical specifications for POS and Touch Monitor series, including I/O, LCD, and sensors.
Explains configuration settings, connectors, and jumper settings for X72/X7D motherboards and touch screen boards.
Guides on installing USB 3.0 drivers and OS on YUNO systems.
Provides step-by-step instructions for opening the system cover via the release button.
Details removing the system cover and the old storage drive.
Guides on installing and securing the new storage drive.
Explains SATA cable connection to motherboard SATA channels.
Covers connecting power, closing cover, and post-replacement OS steps.
Details removing the system cover and finding the memory slot.
Explains how to release and remove the memory module from its slot.
Instructs on sliding the memory module into the slot and securing it.
Details the final step of closing the system cover after memory replacement.
Refers to Chapter 3-1 for system cover removal and locates the power connector.
Guides on connecting the power adapter plug to the DC-IN jack on the I/O panel.
Instructs on removing covers to properly route the DC cord.
Details sliding the cover back and closing the system after installation.
Ensures correct screws and hole spacing for wall mounting, referencing VESA standards.
Details drilling holes, aligning YUNO slots, and securing it to the wall using screws.
Instructs on removing the system cover and L-stand cover for mounting.
Explains unscrewing the panel PC and removing rubber caps.
Details closing the system cover and mounting the unit to a stand or wall using M4 screws.
Lists the components included in the YUNO-KIT-WIFI package: Wi-Fi adapter, antennas.
Warns about static discharge and the need to disconnect power before handling sensitive devices.
Specifies the necessary tools for installation, primarily a Phillips head screwdriver.
Details detaching the kit box from the system and removing screws and the top cover.
Guides on locating and screwing the Bluetooth antenna to the kit box bottom cover.
Covers locating the Wi-Fi antenna, installing the adapter on the mini PCI-E slot, and securing connection wires.
Details placing the top cover, securing screws, and reinstalling the kit box.
Provides a link to download device drivers for the installed Wi-Fi Bluetooth module.
Lists YUNO POS models and their supported CPU types, system memory, and controller details.
Provides LAN/audio controller details, LCD panel size, resolution, brightness, and touch sensor specifications.
Details touch sensor IC, interface, and storage options (HDD/SSD) for POS series.
Details side I/O ports (Power Button, USB) and rear bottom I/O connectors (DC-IN, COM, LAN, USB).
Details wireless LAN, EMI/Safety certifications, operating/storage temperatures, and humidity.
Specifies dimensions, weight, and supported operating systems for the YUNO POS series.
Lists YUNO Touch Monitor models, touch screen board, LCD panel size, resolution, and brightness.
Details side I/O (Power Button, USB), power adapter, and rear bottom I/O connectors (DC-IN, DVI, VGA, USB).
Lists attachment-type peripherals supported by the Touch Monitor series.
Details certifications (EMI, Safety) and operating/storage environments for Touch Monitors.
Specifies dimensions and weight for YUNO Touch Monitor models.
Illustrates the layout of connectors and components on the X72 motherboard.
General| Brand | AURES |
|---|---|
| Model | YUNO-156 |
| Category | Touch terminals |
| Language | English |
To Next Page
