Need help?Do you have a question about the AURES YUNO-151 and is the answer not in the manual?
General| Display Size | 15.1 inches |
|---|---|
| Resolution | 1024 x 768 |
| RAM | 4GB |
| Operating System | Windows 10 IoT |
| Display Type | LED |
| Processor | Intel Celeron J1900 |
| Storage | 64GB |
| Touch Technology | Projected Capacitive |
| Connectivity | WiFi, Ethernet |
| Ports | 1x VGA, 1x RJ45 |
| Mounting | VESA mount |
| Power Supply | External 60W |
Essential precautions for safe operation, installation, and handling of the device.
Illustrates the front panel components and design of the YUNO POS system.
Details the rear panel connections and mounting points of the YUNO POS system.
Shows the side profile and port locations for the YUNO POS system.
Identifies bottom and right-side input/output connectors for POS system models.
Step-by-step guide on how to safely remove the system's outer cover.
Instructions for removing and installing HDDs or SSDs in the YUNO system.
Procedure for locating and replacing the system's memory (RAM) module.
Guide on connecting the 65W power adapter to the YUNO system.
Technical details, resolutions, and interfaces for YUNO POS system models.
Technical details, resolutions, and interfaces for YUNO Touch Monitor models.
Layout, connectors, functions, and jumper settings for the X72 motherboard.
Layout, connectors, functions, and jumper settings for the X7D motherboard.
Lists commands and their hex codes for controlling the CD5220 display in standard mode.
Comprehensive list of ESC/POS commands for controlling thermal printers and displays.
To Next Page
