- 17 -
the device is not hanging or standing in
the immediate vicinity of strong
magnetic fields (e.g. loudspeakers);
no impurities or dust can enter the
device;
candles and other naked flames must
be kept away from the device at all
times to prevent the spread of fire.
Hang or position the wireless
sensors securely
Place the wireless sensors so that they are
protected from direct weather influences,
e.g. under a porch or carport. The wireless
sensors feature class IPX4 protection and
are thereby splash-proof.
You can use the screw anchors and screws
provided to mount the device to the wall.
Make sure that there are no gas, water or
electricity pipes at the drilling site before
mounting on the wall. Note the condition of
the wall. The enclosed fastening material is
not suitable for all types of wall.
The manufacturer accepts no liability for
damage caused by improper fastening.
To Next Page
Loading...
