Oil Filter Replacement
This video shows the oil filter service on a disassembled engine for reference only.
There is no need to disassemble the engine.
http://www.youtube.com/watch?v=YZ0p8hVF7D4&
1. Remove oil filter retainer screw
2. Twist or pull of oil filter
3. Rinse off in soap and water and let dry.
4. Inspect rubber o-ring and replace if necessary.
5. Lubricate o-ring before replacing.
6. Insure oil filter in inserted all the way into engine block and o-ring is not pinched.
This video shows oil filter replacement on a disassembled engine. There is no need to
disassemble your engine it is for educational purposes only.
AGI6500DE & AGI6500SDE Operator / Owners Manual Version 11.4.1
Page 29
To Next Page
Loading...