Technical
Information
no.
912-100-0123
page
4/8
The Mini heaters are developed for the heating of cabins.
The heater can basically be operated with external or recirculating air. Therefore have the
requirements set into the vehicle according to the operation situation.
The heater is delivered by AURORA completely pre-mounted, the installation into the vehicle is
carried out by the customer.
The heat exchanger and the fan wheel with motor are integrated into the heater.
housing:
The housing is made from glass-fibre reinforcement polyamide PA6.
Blower function:
A direct current motor and a fan wheel, is used.
For the 2-speed version a resistor is integrated.
The different blower speeds are achieved using the pre-resistor.
The fan unit is protected against overload by a micro-temperature-fuse MTS (110°C) connected
to the resistor.
Heat exchanger-system:
A flat tube heat exchanger is used.
The water connection diameter is 12 mm (or. ∅ 15 mm for 151-301/302-0008, 151-301-0031,
151-301-0040, 151-302-0041, 151-301/302-0042, 151-301-0043, 151-302-0044 and 151-
301/302-0045).
Examples of different Mini-versions
To Next Page
Loading...
