4
Pre-installation
PLANNING INSTALLATION
Never attempt to turn the light head by hand as this can damage the internal motor components.
NOTE:
Before attempting any installation or
maintenance, ensure that the electrical supply is
switched off and the circuit fuses removed or
the circuit breaker is in the “OFF” position.
TOOLS REQUIRED (NOT INCLUDED)
Hammer
Safety
goggles
Phillips
screwdriver
Level
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Mounting screw 2
BB Drywall screw 2
CC Plastic masonry anchor 2
DD Wire nut 3
EE Cross bar 1
FF Allen Key 1
AA
BB
CC
DD
EE FF
To Next Page
Loading...