EasyManua.ls Logo

aurum AEC-9331BSD-SP8-WF - Installation; Operation-Programing Your Nightwatcher

aurum AEC-9331BSD-SP8-WF
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Operation
This light is equipped with three motion sensors:
zone 1 covers 60 degrees, zone 2 covers 100
degrees and zone 3 covers 60 degrees. There is a
220 degree maximum total in all three zones.
Ensuring correct operation
To ensure correct operation of the sensor, mount
the light fixture so that the traffic passes across the
motion sensor.
Selecting working mode: There is a “Mode” LED
indicator hidden inside the motion detector window
that will display different colored lights when
switching between modes. Once a mode has been
selected, the colored LED light will turn off after 30
seconds.
Mode 1: Recommended for home or business
(default setting)
- Camera will follow motion and record during the
day and night
- Light will illuminate at night only
- Speaker will operate at night only
Mode 2:
- Light illuminates during the day and night
- Camera records motion during the day and night
- Speaker operates during the day and night
Mode 3:
- Camera will follow motion and record during the day
and night
- Light will illuminate at night only
- Speaker will operate during the day only
NOTE:
For the above 3 modes, after audio has been triggered,
no audio will be triggered again during the following 30
seconds.
Mode LED indicator
(Hidden inside the lens)
Symbol
Mode 1
RED
Mode 2
ORANGE
Mode 3
GREEN
Top
Good Sensitivity
Less Sensitivity