Aurus PN-16 - Public Mode; Set Temporary Password in Public Mode; Turn off Public Mode; Turn On;Off the Fake Pin Code Function

www.auruslocks.com
F. Public Mode.
 Input the current management password + “OK”
 You will hear a beep
 And the green light will turns on.
 Press “OK” for at least 3 sec.
 The green light will start to flash quickly
 Input”44” and press Ok.
 You will hear a slightly long beep.
 You have successfully set the public mode on.
G. Set temporary password in Public mode.
 Press “OK”
 The green light will start flashing.
 Input the new password (4-15 digits) and press Ok.
 You will hear a slightly long beep.
 You have successfully set the temporary password in public mode.
NOT: - the temporary password can be used only once.
H. Turn Off Public Mode.
 Input the current management password + “OK”
 You will hear a beep and the green light turns on.
 Press “OK” for at least 3 sec.
 The green light will start flashing. While it is flashing press “OK’ again.
 Input”43” and press Ok.
 You will hear a slightly long beep.
 You have successfully set the public mode off.
I. Turn on/Off the Fake pin code function.
 Input the current management password + “OK”
 You will hear a beep and green light turns on.
 Press “OK” for at least 3 sec.
 The unlocking indicator will start flashing. While it is flashing press “OK’ again