Aurus PN-16 - To Turn off; Other Features; Tips

www.auruslocks.com
TO TURN ON:-
 Input”42” and press Ok.
 You will hear a slightly long beep.
 You have successfully set the Fake Pin code function mode ON.
TO TURN OFF:-
 Input”41” and press Ok.
 You will hear a slightly long beep.
 You have successfully set the Fake Pin code function mode OFF.
Other features:-
1. Anti – theft Technology and Fake Pin password function means you can
input and code(S) before or after the real password to prevent the real
password being known to onlookers. Maximum digits: - 16.
2. Auto – alarm will be activated when you input the wrong password 4
times and the lock will be dead for 1 min.
3. Automatic power shortage prompt: - The lock will emit 3 beeps implying
low battery and the battery needs to be changed. The lock cannot be
operated when the battery voltage is very low.
4. The last password will not be lost in case of battery change.
5. Emergency power supply: - When the battery is too low and lock cannot
be operated. You can connect the USB port with an external power
supply and operate the lock to open and replace the batteries.
I. Tips
Problem
Cause
Solution
After entering the
password, the lock
beeps 3 times.
Battery voltage is too
low
Replace the batteries
After entering the
password once, one
beep is heard and the
green light is on, and
the lock cannot be
opened
The latch is not in
the lock body.
Adjust the position of the lock body.
The lock makes no
sound but the lock can
be opened
Buzzer malfunction
Change the buzzer.