EN 3
Battery indication and charge
1.Battery Power indicator
2. Battery Charge:
1) Directly connect the car charger in USB interface of the
device, charging can shut down/start up condition
2) USB charging, using the USB cable connected to the
computer, shut down/start up condition can be charged
3) USB charger adapter, use the USB cable to connect the USB
charger adapter, charging can shut down/start up condition.
SD card installed and removed
1) In accordance with the instructions in the direction of the
insert SD card into the SD card slot until it is fixed in the SD card
slot.
2) To ta
ke out the SD card, please gently press down the SD
card, reveal a SD card after SD card pops up.
Cautions
1) Please pay attention to the direction of the SD card inserted, if
reversed insert it might damage the machine and the SD card.
2) If the device and SD Card is incompatible , please insert an
SD card again to try again.
3) Please use the high speed SD card (SDHC class 6 card)
Low Power Full
75% remained
25% remained 50% remained
To Next Page
Loading...
