Aussie BONDI II DELUXE User Manual

Aussie
LP Gas Grill
Assembly and Use Manual
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open lid.
4. If odor continues, immediately call your gas
supplier or your fire department.
FOR YOUR SAFETY
1. Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
2. An LP cylinder not connected for use shall not
be stored in the vicinity of this or any other
appliance.
•READ AND FOLLOW INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY OR USE. FAILURE TO
FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, SERIOUS BODILY INJURY AND/OR
PROPERTY LOSS.
•FOR HOUSEHOLD OUTDOOR USE ONLY. NOT FOR COMMERCIAL USE.
•SOME PARTS MAY CONTAIN SHARP EDGES-ESPECIALLY WHERE NOTED IN THIS MANUAL!
WEAR PROTECTIVE GLOVES IF NECESSARY.
•THESE INSTRUCTIONS MUST BE KEPT WITH THE CONSUMER AND RETAINED FOR FUTURE USE.
TMTM
For Customer Service, call 1-800-251-7558
!
II
Deluxe
TM
II
Elite
TM

Aussie BONDI II DELUXE Specifications

General

Brand	Aussie
Model	BONDI II DELUXE
Category	Grill
Language	English

Summary

IMPORTANT SAFEGUARDS

General Safety Warnings

Read and follow all instructions carefully. Use for household outdoor use only.

Fire Safety and Response

Procedures for handling grill fires and preventing grease fires.

Leak Detection and Prevention

Steps to identify and prevent gas leaks and ensure safe operation.

Safe Usage and Handling Guidelines

Rules for safe operation, including unattended use and handling hot surfaces.

General Precautions and Usage Rules

Important precautions for installation, electrical grounding, cords, and cover use.

Parts Diagram

Operating and Maintaining Your LP Gas Grill

Gas, Cylinder, Hose and Regulator Information

Information about the gas, cylinder, hose, and regulator.

Before Using Your Grill

Steps and checks before operating the grill.

Operating the LP Gas Grill

Detailed instructions on how to operate the gas grill.

Care and Maintenance

Guidance on cleaning and maintaining the grill.

Assembly Instructions

Cart Assembly Steps

Assembling the base cart structure of the grill.

Wheel and Axle Installation

Installing the axle, wheels, and wheel covers onto the cart.

Grill Body to Cart Mounting

Attaching the main grill body assembly to the assembled cart.

Side Table Installation

Mounting the left and right side tables to the grill frame.

Rear Brace Installation

Securing the rear support brace to the grill legs.

Hood Handle and Shield Attachment

Attaching the hood handle and shield to the grill hood.

Flavor Activator Attachment

Installing the Flavor Activator component onto the grill.

Privacy Panel Attachment

Attaching the privacy panel to the front legs of the grill.

Cooking Grid Installation

Placing the cooking grid into its position above the Flavor Activator.

LP Cylinder Attachment

Connecting the LP gas cylinder to the grill.

Leak Test Procedure

Performing a leak test on all gas connections before use.

Leak Testing

Selecting a Location

Proper placement of the grill for safe outdoor operation.

Operating the LP Gas Grill

Preparation Before Cooking

Preparing the grill and cooking grids before use.

Lighting the Grill Using Igniter

Step-by-step guide to lighting the grill using the igniter.

Lighting the Side Burner

Instructions for lighting the side burner on Elite models.

Manual Lighting of the Grill

Procedure for manually lighting the grill burners.

Checking Burner Flame and Operation

How to check burner flame and understand cooking methods.

End of Cooking Session and Shutdown

Procedures for ending a cooking session and turning off the grill.

Care and Maintenance

Cleaning Cooking Surfaces and Burners

Instructions for cleaning cooking grids and grill burners.

Cleaning Grill Components

How to clean the Flavor Activator, drip cup, and grill bowl.

Preventive Maintenance and Storage

Regular checks, tightening, and safe storage of the grill.

Troubleshooting

Burner Ignition Issues

Solutions for when the burner fails to light with ignitor or match.

Flame and Gas Flow Problems

Addressing issues like flames blowing out, flare-ups, and low heat.

Grease Fires and Tank Issues

Handling grease fires, LP tank filling problems, and regulator sounds.

Important Notice - LP Cylinder with OPD

Limited Warranty