Austere Power Series - User Manual

Power Series Surge Suppressor User Guide/Owner’s Manual
Model numbers: 3S-PS4-US1, 5S-PS4-US1, 7S-PS4-US1
CAUTION To reduce the risk of electrical shock, only use the power surge protection
indoors and in cool dry locations. DO NOT connect to an ungrounded outlet. DO NOT use
with 2-wire extension cords or adapters or any type of extension cord into the power unit.
DO NOT install power near any heat-emitting appliances such as radiators or heat registers. DO
NOT install where excessive moisture is present. DO NOT drill into any part of the housing or open
the housing for any reason. There are no user-serviceable parts inside. DO NOT plug into another
relocatable power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium
equipment.
This product is recommended to be used with your home theater equipment, gaming systems, home
office equipment, and portable electronic devices. It is not intended to be used with any medical
equipment or life support devices. Do not use this equipment in the presence of a flammable
anesthetic mixture with air, oxygen, or nitrous oxide.
Important: This device features internal protection that will disconnect the surge protective
component at the end of its useful life but will maintain mains power to the surge protector– all
connected devices are now unprotected. It is recommended to replace this unit every 5 years.
Product Registration
Prior to using your product and in order to activate the lifetime guarantee, please go to
www.austere.com/guarantee
and register your product.

Summary

Safety and Product Information

Important Safety Warnings

Critical precautions for safe operation to prevent electrical shock and damage.

Recommended Usage and Limitations

Guidelines on suitable equipment and environments, plus prohibited uses.

Product Lifespan and Replacement

Information on the surge protection component's end-of-life indicator and replacement need.

Product Registration Process

Steps to register the product for warranty activation and lifetime guarantee.

Mounting the Power Unit

Optional Security Screw Mounting

Detailed instructions for wall-mounting the unit with an optional security screw.

Powering and Indicators

Connecting to AC Power

Instructions for plugging the unit into a properly grounded 120V AC outlet.

Understanding LED Status Indicators

Explanation of Power, Ground, and Protected LEDs for operational status.

Connecting Equipment and USB Ports

Connecting Devices and Load Management

Guidance on connecting equipment, total load limits, and circuit breaker reset.

USB Charging Port Details

Specifications for the Omniport USB charging ports across different series models.

Specifications and Support

Technical Specifications

Key electrical ratings, surge protection levels, and compliance certifications.

Technical Support and Warranty

Contact information for technical assistance and lifetime guarantee details.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Austere Power Series Surge Suppressor is a power surge protection device designed for indoor use in cool, dry locations. It is available in three models: 3S-PS4-US1, 5S-PS4-US1, and 7S-PS4-US1, which are referred to as III Series, V Series, and VII Series respectively.

Function Description

The primary function of this device is to protect electronic equipment from power surges and spikes. It provides multiple AC outlets and USB charging ports, allowing users to power and charge various devices simultaneously. The surge protector incorporates internal protection that disconnects the surge protective component at the end of its useful life, while maintaining mains power to the connected devices, albeit without surge protection.

Important Technical Specifications

• Electrical Rating: 120 Volts AC / 15A / 1800W
• Maximum Peak Current: 15A
• Surge Protection (Joules):
  • III Series (3S-PS4-US1): 2500 joules
  • V Series (5S-PS4-US1): 3000 joules
  • VII Series (7S-PS4-US1): 3500 joules
• USB Charging Ports (4-Outlet Power models):
  • III Series: Two Omniport USBs (2.4A Shared), including 1 USB-C and 1 USB-A.
  • V Series: Three Omniport USBs, including 1 USB-C PD 20W, 1 USB-C, and 1 USB-A sharing 2.4A.
  • VII Series: Three Omniport USBs, including 1 USB-C PD 45W, 1 USB-C PD 20W, and 1 USB-A with dedicated 2.4A. If both USB-C ports are used, the PD 45W is shared.
• Certifications: FCC Part 15 Subpart B, Class B; 2020 and ANSI C63.4; 2014. Electrical Safety United States: UL 1310: 2018 Ed. 7 + R:16 Aug 2019, UL 498A:2008 Ed.2 + R:29 Oct 2022, UL 1449:2021 Ed.5, CSA 22.2 #223: 2015 Ed. 3, CSA 22.2#42: 2010 Ed.7+U1;U2;U3;U4, CSA 22.2#269.3:2017 Ed. 2.
• Energy Efficiency: Complies with California Energy Commission's Appliance Regulations (CEC-400-2017-002: Section 1601-1608 of Title 20 of the California Code of Regulations) and US Department of Energy, 10 CFR Part 429.

Usage Features

• Recommended Use: Ideal for home theater equipment, gaming systems, home office equipment, and portable electronic devices.
• Installation:
  • Wall Mountable: The 4-outlet power models are wall mountable.
  • Security Screw (Optional): For outlets with a center screw (e.g., standard outlets), the device can be secured by removing the existing center screw from the outlet cover, opening a removable flap on the front of the Austere Power unit, and using the included silver screw to fasten the unit to the outlet cover before plugging it in and repositioning the flap.
  • Decora Outlets: For outlets without a center screw (e.g., Decora outlets), simply open the removable cover on the front of the unit and remove the screw.
• Power Connection: Must be plugged into a standard, 3-wire grounded 120V AC, 60Hz outlet.
• Power On/Off: Features a power switch/reset button to turn the unit ON and OFF.
• LED Status Indicators: Three LED lights provide real-time status:
  • Power LED (Blue): Indicates the surge protector is plugged in and receiving power.
  • Ground LED (Blue): Indicates the unit is plugged into a properly grounded circuit. If this LED does not illuminate, it suggests a wiring issue with the AC outlet.
  • Protected LED (Blue): Indicates that the surge suppression components are intact and providing full protection. If this LED no longer illuminates, the unit needs replacement.
• SmartFit Outlets: All Austere power products feature expansive SmartFit outlets designed to accommodate larger equipment transformers without obstructing adjacent outlets.
• Circuit Breaker: An internal circuit breaker protects against overload. If the total equipment load exceeds 15 amps, the breaker will trip, and the outlets will stop providing power. To reset, reduce the load by unplugging devices and then cycle the power button.
• Daisy Chaining: Explicitly states "DO NOT 'daisy chain' surge protectors."
• Extension Cords: Explicitly states "DO NOT plug into another relocatable power tap" and "you should NOT plug in extension cords directly into the power unit."
• Aquarium Equipment: Explicitly states "DO NOT use with any aquarium equipment."
• Medical/Life Support: Not intended for use with medical equipment or life support devices, or in the presence of flammable anesthetic mixtures.

Maintenance Features

• Replacement Recommendation: The device features internal protection that will disconnect the surge protective component at the end of its useful life. It is recommended to replace the unit every 5 years.
• Protected LED as Indicator: When the Protected LED no longer illuminates, it signifies that the surge suppression components are no longer functional, and the unit must be replaced to ensure continued protection against surges and spikes.
• Ground LED as Indicator: If the Ground LED does not illuminate, it indicates a potential issue with the electrical wiring of the AC outlet, recommending inspection by a licensed electrician.
• No User-Serviceable Parts: Users are advised not to drill into or open the housing for any reason, as there are no user-serviceable parts inside.
• Product Registration: Users are encouraged to register their product at www.austere.com/guarantee to activate the lifetime guarantee.
• Technical Support: Available via phone (1-855-672-0684) and email (support@austere.com) for installation, troubleshooting, and general product questions.

Austere Power Series Specifications

General

Brand	Austere
Model	Power Series
Category	Surge Protector
Language	English