Austere VII Series - User Manual

Power \\ Surge Suppressor User Guide/Owner’s Manual
VII Series \\ Power 4-Outlet
V Series \\ Power 4-Outlet
III Series \\ Power 4-Outlet
Model numbers: 7S-PS4-US1, 5S-PS4-US1 and, 3S-PS4-US1
CAUTION To reduce the risk of electrical shock, only use Austere Power indoors and in cool
dry locations. DO NOT connect to an ungrounded outlet. DO NOT bring power into
Austere Power with any type of extension cord, adaptor, or ungrounded 2-prong
extension. DO NOT install Austere Power near any heat-emitting appliances such as
radiators or heat registers. DO NOT install Austere Power where excessive moisture
is present. DO NOT drill into any part of the Austere Power housing or open the housing for any
reason. There are no user-serviceable parts inside. DO NOT plug into another relocatable power
tap. DO NOT “daisy chain” Austere Power. DO NOT use with any aquarium equipment.
This product is recommended for use with your home theater equipment, gaming systems, home
office equipment, and portable electronic devices. It is not intended for commercial or industrial
applications, including high-risk medical devices. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen, or nitrous oxide.
Product Registration
Prior to using your product, please go to www.austere.com/guarantee to register your product and
access our complete lifetime guarantee statement.
Safety Instructions
Read this manual thoroughly before use and keep it safe for future reference, along with the
purchase receipt and carton. The safety precautions enclosed reduce the risk of fire, electric shock,
and injury when correctly adhered to. Follow all instructions and take notice of all warnings to
reduce the risk of fire or electric shock. Always exercise caution when operating any electrical
device. Install in accordance with the manufacturer’s instructions. Turn Austere Power off when
not in use.
DO NOT use if Austere Power becomes damaged or broken. Refer all servicing to qualified service
personnel. Servicing is required when Austere Power has been damaged in any way, such as a
power-supply plug is damaged, liquid has been spilled, or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Summary

Safety Instructions

General Safety Precautions

Read manual, keep safe, follow instructions to reduce risk of fire, electric shock, and injury.

Handling Damaged Units

Indoor Use Only

Use Austere Power indoors in cool, dry locations; avoid ungrounded outlets and excessive moisture.

Mounting Instructions

Wall Mounting

Austere Power 4-outlet is wall mountable using provided screws for secure attachment.

LED Status Indicators

Power LED

Ground LED Status

Illuminates blue for proper grounding; absence means no surge protection.

Protected LED Status

Illuminates blue when surge protection is intact; absence means unit needs replacement.

Additional Safety Precautions

Mounting Safety

Use provided hardware, secure to wall, keep cover on to avoid contact with live electricity.

Environmental Hazards

Product Handling

Technical Support

Contact Information

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Safety Precautions

The Austere Power Surge Suppressor is a power strip designed to protect electronic equipment from power surges and irregular power events, while also offering convenient charging options. It is available in three series: VII, V, and III, all featuring a 4-outlet configuration. The specific model numbers covered are 7S-PS4-US1, 5S-PS4-US1, and 3S-PS4-US1.

Function Description:

The primary function of the Austere Power Surge Suppressor is to provide surge protection for home theater equipment, gaming systems, home office equipment, and portable electronic devices. It filters AC power to ensure clean and stable power delivery to connected devices. The unit also incorporates USB charging ports for various electronic devices. It is designed for indoor use in cool, dry locations and is not intended for commercial, industrial, or high-risk medical applications, nor for use in the presence of flammable anesthetic mixtures.

Important Technical Specifications:

• Electrical Rating: 120 Volts AC / 15 Amps / 1800 Watts.
• Maximum Peak Current: 15 Amps.
• Surge Protection:
  • III Series (3S-PS4-US1): 2500 joules.
  • V Series (5S-PS4-US1): 3000 joules.
  • VII Series (7S-PS4-US1): 3500 joules.
• USB Charging Ports (OmniPort USBs):
  • III Series 4-Outlet Power: Two OmniPort USBs (1 USB-C and 1 USB-A), sharing 2.4A.
  • V Series 4-Outlet Power: Three OmniPort USBs (1 USB-C PD 20W, 1 USB-C, and 1 USB-A), sharing 2.4A.
  • VII Series 4-Outlet Power: Three OmniPort USBs (1 USB-C PD 45W, 1 USB-C PD 20W, and 1 USB-A with dedicated 2.4A). If both USB-C ports are used, the PD 45W is shared.
• Compliance:
  • FCC Part 15 Subpart B, Class B: 2020 and ANSI C63.4; 2014.
  • California Energy Commission's Appliance Regulations (CEC-400-2017-002: Section 1601-1608 of Title 20 of the California Code of Regulations).
  • US Department of Energy, 10 CFR Part 429.
  • Electrical Safety United States: UL 1310: 2018 Ed. 7 + R:16 Aug 2019, UL 498A:2008 Ed.2 + R:29 Oct 2022, UL 1449:2021 Ed.5, CSA 22.2 #223: 2015 Ed. 3, CSA 22.2#42: 2010 Ed.7+U1;U2;U3;U4, CSA 22.2#269.3:2017 Ed. 2.

Usage Features:

• SmartFit Outlets: The surge suppressor features expansive SmartFit outlets designed to accommodate large transformers without obstructing neighboring outlets.
• LED Status Indicators:
  • Power LED: Illuminates blue when the unit is plugged in and receiving power.
  • Ground LED: Illuminates blue when the unit is plugged into a properly grounded circuit. If this LED does not illuminate, it indicates a grounding issue, and connected equipment is not protected from surge or irregular power events. Operating the unit without a lit Ground LED voids the Austere Limited Lifetime Guarantee and Component Guarantee.
  • Protected LED: Illuminates blue when the surge suppression components are intact and providing full protection. If this LED no longer illuminates, the unit needs replacement, as connected equipment is no longer protected. Operating the unit without a lit Protected LED voids the Austere Limited Lifetime Guarantee and Component Guarantee.
• Circuit Breaker: An internal circuit breaker trips if the total equipment load exceeds 15 amps, cutting power to the outlets. To reset, reduce the load by unplugging devices and cycle the power button off and then on again.
• Wall Mountable: The unit is wall mountable and includes a screw for secure attachment to an existing outlet. Installation involves removing the center screw from the outlet cover, opening a removable cover on the front of the Austere Power unit, using the provided silver screw to secure the unit to the outlet, plugging it in, and then re-positioning the removable cover. For Decora outlets or those without a center screw, the screw can be removed from the front cover.
• Power Switch/Reset Button: A single button controls the power and acts as a reset for the circuit breaker.

Maintenance Features:

• Damage Indication: The Protected LED serves as a clear indicator for when the surge suppression components have been compromised, signaling that the unit needs to be replaced to maintain protection.
• Cleaning: The device should only be cleaned with a dry cloth.
• Product Registration: Users are encouraged to register their product at www.austere.com/guarantee to access the complete lifetime guarantee statement.
• Technical Support: Technical support is available via phone (1-855-672-0684) and email (support@austere.com) for installation, troubleshooting, and general product questions.

Safety Precautions:

• Use only indoors and in cool, dry locations.
• Do not connect to an ungrounded outlet or use with extension cords, adaptors, or ungrounded 2-prong extensions.
• Avoid installing near heat-emitting appliances or where excessive moisture is present.
• Do not drill into or open the housing; there are no user-serviceable parts inside.
• Do not plug into another relocatable power tap or "daisy chain" Austere Power units.
• Not for use with aquarium equipment.
• Ensure the grounding-type plug's safety purpose is maintained; if the plug doesn't fit, consult an electrician.
• Securely attach the product to the wall outlet using the provided hardware as per installation instructions.
• Keep the outlet cover on when mounting to avoid contact with live electricity.
• Test the strength of attachment to the wall before use.
• Do not operate where there is potential exposure to flammable liquids or gases, or in a wet or high-humidity environment.
• Keep away from children; it is not a toy.
• If the unit becomes damaged or broken, refer all servicing to qualified service personnel. Damage includes a damaged power-supply plug, liquid spills, objects falling into the apparatus, exposure to rain or moisture, abnormal operation, or being dropped.

Austere VII Series Specifications

General

Brand	Austere
Model	VII Series
Category	Surge Protector
Language	English