Why is there no hot water to taps in my AUSTRACK CAMPERS TANAMI X15A?
If there's no hot water to the taps, first ensure the hot water system is lit. Also, make sure the taps in the outside shower are turned off tightly. You can also adjust the tempering valve under the seat to increase the maximum temperature of the system.
Why is my AUSTRACK CAMPERS TANAMI X15A not charging from 240 V?
If your camping equipment is not charging from 240V, verify that the mains power is connected and that the RCD hasn't tripped on the incoming power supply or within the hybrid. Also, check that the charger is plugged into the power point next to the batteries and is turned on, and ensure the batteries are above 10V.
What to do if my AUSTRACK CAMPERS Camping Equipment has no power?
If there's no power to your camping equipment, first check that the main 12V switch is turned on. Also, ensure the batteries are charged and inspect the fuse box for any blown fuses.
What to do if my AUSTRACK CAMPERS TANAMI X15A AC is not cooling or heating?
If the AC in your camping equipment is not cooling or heating, make sure the correct temperature setting is selected.
Why does the power in my AUSTRACK CAMPERS TANAMI X15A drop too quickly?
If the power in your camping equipment is dropping too quickly, make sure the inverter is not left on all the time. Also, check that the breakaway pin is not removed from the switch on the drawbar. If running off-grid, ensure that appliances and lights are not left on unnecessarily. Finally, check that the fridge is set to an appropriate temperature, so the compressor isn't always running, and that the lids are not being opened or left open frequently.
Why is there no water to taps in my AUSTRACK CAMPERS Camping Equipment?
If there is no water coming to the taps, start by ensuring the water pump is switched on and that there is water in the selected tank. Try swapping to another water tank. Finally, let the tap run for about 20 seconds to clear any air from the lines.
What does E1 error code mean on my AUSTRACK CAMPERS TANAMI X15A fridge?
If you're seeing an E1 error code, make sure the fridge is set to V L and that the battery voltage is above 12.0V. Also, try using the Anderson lead for the fridge.
Why is my AUSTRACK CAMPERS TANAMI X15A Camping Equipment external cooker not lighting?
If the external cooker is not lighting, make sure the bayonet hose is connected to the fitting on the rear of the hybrid. Check that the gas hose is not kinked and that there is gas in the bottle. Also, ensure the correct gas bottle is selected on the regulator and hold down the button on the cooktop to pull the gas through the lines.
Why does my AUSTRACK CAMPERS TANAMI X15A Camping Equipment inverter switch off when in use?
If the inverter switches off during use, it could be due to too much power being drawn. Ensure the total appliance wattage is under 2000W.
Why is my AUSTRACK CAMPERS TANAMI X15A inverter not working at the inverter?
If there's no power to the inverter at the unit itself, ensure there's sufficient battery voltage (at least 12.2V) and check that the RCD switch hasn't tripped.
Explanation of the Redarc Manager30 BMS and its charging/monitoring functions.
Details on the 100Ah Lithium batteries and 400W roof solar setup.
How to operate the 2000W pure sine wave inverter and its limitations.
Guidance on connecting to 240V mains power and essential safety precautions.
Identification and function of the main control panel buttons and displays.
How to operate the water pump and common issues like leaks.
Step-by-step instructions for lighting the system on gas and 240V power.
General usage, draining, frost protection, and maintenance advice.
General| Brand | AUSTRACK CAMPERS |
|---|---|
| Model | TANAMI X15A |
| Category | Camping Equipment |
| Language | English |
To Next Page