5 english
Press the "Release ash pan" button to close the riddling grate. This process
takes about 90 seconds. The ash pan can then be removed.
This function is only possible in the "OFF" operating mode.
Display – Heat output indicator, further function menus
By pressing the appropriate icon, it is possible to switch to the desired setting or function.
The desired heat output can be set by pressing the buttons . This setting is accepted immediately.
By pressing the Start / Stop button for longer than 2 seconds, the stove is activated or stopped.
Display – Status indicator
By pressing the Start / Stop button for longer than 2 seconds, the stove is activated or stopped.
Function – Air distribution module, fan speed control
An air distribution module is available as an option for the RUBY model. This allows an additional room to be
heated using warm air. The warm air is extracted in front of the rear wall of the firebox.
For installation and any other information, please contact your Austroflamm dealer.
To Next Page
Loading...