EasyManua.ls Logo

Austroflamm Xtra - Page 11

Austroflamm Xtra
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Xtra montieren EN 2 | Installing Xtra
11
Fig.4: Bricks installed on the right
5) Repeat the steps on the right side and install the
bricks from bottom to top.
ð Note that the third brick from bottom is narrower
than the remaining bricks.
TIP
It is absolutely vital to start with the left-hand side. Other-
wise the stove may tip over!
Install the XTRA bricks, always starting on the left side from
bottom to top.
Fig.5: Xtra installed
6) Remount side cladding and attach cover.
ð Xtra installed.