AUTEC AIRRT32NM User Manual

Working frequency (radio modules AIRTR08LM and AIRRT32NM)
STARTFUNCT.
1
2
3
4
R
G
STOP
S1 S2
S3
Working frequency (radio modules AIRTR08LM and AIRRT32NM)
Information provided in this manual is used for the installation of the radio remote con-
trol on the machine and for its maintenance.
Information provided in this manual allows to disable, enable and set some radio remote
control's functions that may have impacts on the risk assessment related to the ma-
chine; this assessment must be carried out to decide whether the machine can be radio
remote controlled.
Information provided in this manual cannot be used and performed by people who are
not competent, responsible for and authorized to do that.
The person in charge for the machinery's safety must keep information contained in this
manual reserved.
Those who use this information must also have been trained about the radio remote
control and its risks by Autec's personnell or by people authorized by Autec.
Autec cannot be held liable for responsibilities resulting from the modification of these
functionalities after the product sale.
IMPORTANT INFORMATION
AIR SERIES

AUTEC AIRRT32NM Specifications

General

Brand	AUTEC
Model	AIRRT32NM
Category	Control Unit
Language	English

Summary

Important Safety and Usage Information

General Section Overview

General Operating Instructions

Provides information to enable, disable, and modify Autec Air series radio remote control features.

Symbol and Indicator Conventions

Explains symbols indicating important information and texts requiring careful reading.

Control Signals and Pushbutton Status

Details LED signals and pushbutton states for remote control operation.

MSC Mode of Service Control

MSC Mode Description and Purpose

Explains the MSC mode is used for installation menus and disabling outputs.

Enable/Disable MSC via Receiving Unit

Procedure to enable or disable MSC mode using DIP switches on the receiving unit.

Enable/Disable MSC via Transmitting Unit

Procedure to enable or disable MSC mode using pushbuttons on the transmitting unit.

Working Frequency Configuration

Working Frequency Programming Overview

Details programming for BANK GROUP, RADIO MODE, and CHANNEL BANK settings.

Exit Programming Without Changes

Instructions on how to leave programming mode without saving any settings.

Frequency Band Selection via DIP Switch

Setting the operating frequency band (433 MHz or 915 MHz) using DIP 1.

Frequency Use Mode Selection

Choosing between automatic scan (AUTO) or manual frequency selection (MANUAL).

BANK GROUP Programming Procedure

Step-by-step guide to set the BANK GROUP for radio remote control.

RADIO MODE Programming Procedure

Step-by-step guide to set the RADIO MODE (AUTO/MANUAL).

CHANNEL BANK Programming Procedure

Step-by-step guide to set the CHANNEL BANK for frequency selection.

Manual Frequency Selection Example

Illustrates setting a specific frequency using MANUAL mode and frequency tables.

Frequency Reference Tables