AUTEC DCRM24 User Manual

Original instructions
AIR SERIES
Part D: receiving unit
DCRM24 (RMG)
INDEX
1 Description ............................................................................................................ 2
2 Technical data ....................................................................................................... 3
3 Technical data sheet ............................................................................................. 4
4 Plates ..................................................................................................................... 4
4.1 Plates on DCRM24 unit in a radio remote control ............................................. 4
4.2 Plates on DCRM24 unit in a Take & Release radio remote control ................... 4
4.3 Plates on DCRM24 unit in a Multi Units or Multi Receiver radio remote control 5
5 Warnings for installation ...................................................................................... 5
5.1 Wiring .............................................................................................................. 5
6 Light signals .......................................................................................................... 6
6.1 POWER LED (green) ....................................................................................... 6
6.2 ENABLE LED (green) ...................................................................................... 6
7 Operation ............................................................................................................... 6
7.1 Electronic module ............................................................................................ 6
7.2 DIP switches .................................................................................................... 6
7.3 Internal light signals ......................................................................................... 6
7.4 Command outputs ............................................................................................ 6
8 Malfunction signalled by the receiving unit ........................................................ 7
AUTEC
LIRMGE00-01

AUTEC DCRM24 Specifications

General

Protection Degree	IP65
Number of Channels	24
Protection Class	III
Current Consumption	≤ 100mA
Operating Voltage	12/24 V DC

Summary

Description of Receiving Unit

Technical Data Specifications

Technical Data Sheet Information

Unit Plates and Identification

Plates on DCRM24 in Radio Remote Control

Details plates on the DCRM24 unit used in standard radio remote controls, including identification and technical data plates.

Plates on DCRM24 in Take & Release Control

Details plates on the DCRM24 unit used in Take & Release radio remote controls, covering identification and technical data plates.

Plates on DCRM24 in Multi Units/Receiver Control

Details plates on the DCRM24 unit for Multi Units or Multi Receiver setups, including identification and technical data plates.

Installation Warnings and Wiring

Wiring Safety Precautions

Provides critical warnings regarding wiring, especially for solid state commands and power supply connections to prevent damage.

Light Signals and Operation Details

POWER LED Status Indicator

Explains the meaning of the green POWER LED, indicating the receiving unit's power status (on or off).

ENABLE LED Status Indicator

Explains the meaning of the green ENABLE LED, indicating the status of the radio link communication.

Electronic Module and DIP Switch Configuration

Details the electronic module's function, including the address key, and provides instructions for DIP switch settings.

Internal Signals and Command Outputs

Describes internal light signals indicating relay activation and where to find command output information.

Troubleshooting Receiving Unit Malfunctions