English
Page 24 LIMBS0U3-00_eng.fm
DC battery charger
EN
DC BATTERY CHARGER
Conformity
Model MBC930D complies with the EMC Directive (2004/108/EC),
the LVD Directive 72/245/EEC as last amended by Directive 2006/
96/EC (mark , with approval number e24*72/245*2006/
28*1639*00) and with the following harmonised standards:
EN 55014-1 EN 55014-2 EN 61003-2
EN 61000-3-3 EN 60335-1 EN 60335-2-29
Technical data
Electrical connection
Always respect the following warnings before use:
The power supply cable of battery charger MBC930D cannot
be longer than two meters.
Check that the battery charger power supply voltage is with-
in the limits given in the “Technical data”.
Make sure that the battery charger power supply is protect-
ed against short circuit and comes:
- from a 12/24 Vdc battery or
- from a power supply unit with a safety isolating transform-
er.
Supply voltage ................................................................... 9 - 30 Vdc
Absorbed power............................................................................ 7 W
Output voltage............................................................................ 9 Vdc
Output current........................................................................ 450 mA
Fuse ............................................................................................ T2 A
Maximum recharging time ............................................................. 4 h
Recharging temperature range..................................... +5°C - +45°C
Protection degree..........................................................................IP40
Dimensions .......................................................... 100 x 134 x 57 mm
To Next Page
Loading...
