AUTEC MBM06MH - MBM06 MH Rechargeable Battery; Technical Data; Plate

3 MBM06MH rechargeable battery
The MBM06MH rechargeable battery is used to provide power to Autec Transmitting Units
with compatible battery housing (please check this in "Part C" of the Instruction Manual).
A
B
A Contacts
B Technical data plate
3.1 Technical data
Type/voltage/capacity ......................................................................... NiMH/7.2V/750mAh
Max. recharge time ........................................................................................................ 4h
Recharge temperature ................................................... +5°C to +45°C (+41°F to +113°F)
Usage temperature .......................................................... -20°C to +55°C (-4°F to +131°F)
Protection degree ....................................................................................................... IP65
3.2 Plate
A plate is stuck on the battery, showing battery's identi󰘰cation, main technical data, marking
and marks (if any).
This plate must not be:
- removed from its position (removal voids the warranty),
- altered or damaged (contact Autec for replacement).
AUTEC -
MBM06MH rechargeable battery 13
LIUMBS001_eng-02