3
The battery is fully charged when the CHARGE
LED switches o. To remove the battery:
a. Push the battery towards the contacts on the
Battery Charger.
b. Lift the battery.
If you leave the battery in the battery charger after
charging has been completed, the battery charger
can start recharging again. This compensates
self-discharge (if any).
Do not, in any case, leave the battery under
charge for prolonged time when it is not in use.
3a3a
3b3b
4. Disconnect power supply from the battery charger (the POWER LED switches o).
5.7 Disposal
When disposing of a Battery Charger, its components must be managed as separate waste.
When disposing of a Battery Charger, please comply with the provisions and/or the regulations
in force in the country where it is used.
30
LIUMBS001_eng-02
MBC930D battery charger
AUTEC -
To Next Page
Loading...
