Autel EVO Lite+ Standard EVO Lite+ Premium - Intelligent Flight Control System


It is always necessary to take down the propeller before motor test.

Please use the special propeller for Lite series provided by Autel Robotics. Do not use
the propellers of different models.
 In the case of blade replacement, use the two blades in the same package. Never mix
with the blades in other package.
 Never modify the physical structure of motor without approval.
 Never cover the motor air outlet or the air outlet on the aircraft shell.
2.6 Intelligent flight control system
EVO Lite series is to conduct stable and convenient flight control by its built-in intelligent
flight control system. This system can support multiple advanced functions, including course
reversal, fail-safe, positioning system, etc. The working description of each module is as
shown in the table below.
Intelligent flight control system module
Module
Description
IMU
Measure the three-axis attitude angle (or angular rate) and
acceleration of the aircraft.
Compass
Measure geomagnetic field and provide course reference of
aircraft.
GNSS receiver
Receive the GPS signal to determine longitude, latitude and
altitude.
Barometer
Measure atmospheric pressure to determine the altitude of
aircraft.
Ultrasonic sensor
Measure the distance between aircraft and ground.
Binocular vision system
Support the forward, backward and downward binocular
vision.