2) Control
- Unit: Set default units to metric (km/h or m/h) or imperial (mph/h)
- Command stick mode: set the command stick mode as mode 1, mode 2, or mode 3.
- Flight mode: set the control speed of the aircraft and gimbal. Options include smooth mode,
standard mode, and sport mode.
- RC customizable button: click or double-click the customizable button on the left to set a
custom function.
- RC calibration: follow the prompt steps to calibrate the remote controller. Calibration is
required when the flight attitude is inconsistent with the direction of the remote controller
stick.
- Gimbal setting: set the working mode (stabilized / FPV) and gimbal angle
(center/downward); activate gimbal calibration and gimbal manual adjustment, and enable
gimbal pitch adjustment upwards by 30°.
3) Shooting
- General setting: photo format (JPG/DNG/JPG+DNG), video format (MP4/MOV), video
encoding (H.265/H.264), storage location (Internal Memory/SD card), formatting. Select
settings such as audio recording during video recording, caching during video recording, and
camera reset.
- Shooting assist function: histogram, overexpose warning, grid, download aerial material,
defog, anti-flicker, and other settings.
4) Image transmission
- Image transmission mode: HD, smooth, 2.7K.
5) About
- View device serial number, firmware version, App version, and other information.
10. Prompt information
Click to view the meaning of each option in the image transmission interface.
To Next Page
Loading...
