To Next PageTo Next Page
Need help?Do you have a question about the Autel MaxiCheck MX808S and is the answer not in the manual?
General| Operating System | Android |
|---|---|
| Processor | Quad-Core |
| RAM | 2 GB |
| Storage | 16 GB |
| Battery Charging Input | 5V/2A |
| Tested Battery Life | Up to 8 hours |
| Weight | 1.5 lbs |
| Languages | Multiple languages supported |
| Connectivity | Wi-Fi, Bluetooth, USB |
| Supported Automotive Protocols | CAN, J1850, ISO9141, KWP2000 |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -4°F to 140°F (-20°C to 60°C) |
| Audio Input/Output | Built-in speaker, microphone |
| Display | 7-inch LCD capacitive touchscreen with 1024 x 600 resolution |
Press and hold the Lock/Power button to turn on the tablet.
Connect the female adapter of the main cable to the tablet and tighten the captive screws.
Scan QR code to visit pro.autel.com and create an Autel ID.
Connect the 16-pin male adapter of the main cable to the vehicle's DLC.
Tap Update application, check available updates, and tap Update All or specific item updates.
Run MaxiSys Printer, connect tablet to network, and print documents from the tablet.
Install Wi-Fi printer APP on tablet, then click Print button for saved files.
Details compliance with FCC Part 15, including conditions, warnings, and interference guidelines.
Device evaluated for general RF exposure, usable in portable conditions without restriction.
Details compliance with Industry Canada licence-exempt RSS standards and operational conditions.
