66
1) Tap Front left wheel sensor on the tire pressure sensor replacement
menu.
2) Enter the 8 digit sensor identification as required. Press OK.
3) Continue to select tire position and enter sensor IDs. A message will
display when the entered IDs have been registered to the vehicle.
NOTE
The vehicle must remain stationary for at least 15 minutes with the ignition
off, this will place the sensors into sleep mode. The vehicle must be driven
for at least 15 minutes at a speed higher than 20 kph to ensure the module
has learned the sensor identifications and positions.
For other services, please follow the on-screen instructions to operate.
Figure 5-31 Sample Tire Pressure Sensor Replacement Screen
Figure 5-32 Sample Sensor ID Input Screen
To Next Page
Loading...
