To Next PageTo Next Page
Need help?Do you have a question about the Autel Maxiim IM608 Pro and is the answer not in the manual?
General| Operating System | Android |
|---|---|
| Memory | 2GB RAM & 64GB On-board Memory |
| Camera | Rear: 8 Megapixel, Front: 2 Megapixel |
| Connectivity | Wi-Fi (802.11 a/b/g/n/ac), USB 2.0, HDMI |
| Battery | 15000mAh lithium-polymer rechargeable battery |
| Weight | 1.42 kg |
| Sensors | Ambient light sensor |
| Audio Input/Output | Microphone, Dual Speakers |
| Operating Temp | 0 to 50°C (32 to 122°F) |
| Storage Temp | -4°F to 140°F (-20°C to 60°C) |
| Supported Protocols | ISO9141-2, ISO14230-2, ISO15765, SAE-J1850 PWM, SAE-J1850 VPW |
| Functions | Advanced diagnostics |
| Display | 10.1-inch capacitive touchscreen with 1920x1200 resolution |
Explains the conventions used in the manual, such as bold text for selectable items.
Explains the use of notes and important messages for helpful information and warnings.
Introduces the MaxiIM IM608 Pro display tablet and its key features.
Lists the technical specifications of the MaxiIM IM608 Pro Display Tablet.
Describes the MaxiFlash as a multi-protocol Pass-Thru vehicle interface.
Lists the technical specifications of the MaxiFlash.
Introduces the XP400 Pro key programmer and its functions.
Lists the technical specifications of the XP400 Pro.
Lists and describes the included accessories for the device.
Instructions on how to power on the MaxiIM tablet.
Describes the different application buttons on the MaxiIM Job Menu.
Explains the functions of the locator and navigation buttons on the tablet.
Explains the system status icons displayed on the tablet interface.
Procedures for safely powering down the MaxiIM tablet.
Instructions for rebooting the system in case of a crash.
Steps to establish communication between the tablet and the vehicle.
Details on connecting the MaxiFlash to the vehicle's DLC.
How to connect to a vehicle with an OBD II diagnostic port.
How to connect to vehicles that do not have an OBD II port.
Explains how to connect the MaxiIM tablet to the MaxiFlash.
Steps for establishing a Bluetooth connection between devices.
How to establish a connection using a USB cable.
Troubleshooting steps for communication errors.
Describes the layout of the vehicle menu in the IMMO application.
Explains the functions of the buttons in the top toolbar.
Explains how to select vehicle manufacturers.
Details the methods for identifying the vehicle.
Describes the process of automatically scanning the vehicle's VIN.
Explains how to manually enter the vehicle's VIN.
Describes the automatic vehicle selection process.
Explains how to manually select the vehicle.
Discusses navigating the IMMO interface and selecting tests.
Details the different sections of the IMMO screen.
Describes the operations available on the IMMO operation toolbar.
Explains the information displayed in the status bar.
Describes the content of the main section of the IMMO screen.
Explains the use of functional buttons within the IMMO application.
Describes the different types of screen messages encountered.
Explains confirmation messages used in the system.
Explains warning messages for irreversible changes or data loss.
Explains error messages indicating system or procedural errors.
Guides on making selections within the IMMO application.
Details the Smart Mode for guided IMMO functions with step-by-step instructions.
Explains Expert Mode for performing individual IMMO functions.
Instructions for reading IMMO data from the vehicle.
Guides on learning new keys for the vehicle.
Describes the Programming application and its requirements.
Guides on reading and writing data from/to vehicle chips.
Instructions for reading and writing vehicle key data.
Overview of the diagnostics application and its capabilities.
Performs a comprehensive scan of vehicle ECUs for faults.
Allows manual selection of control units for testing.
Retrieves and displays detailed ECU information.
Displays detailed information of DTC records retrieved from the ECU.
Erases DTC records and other data from the vehicle's ECU.
Retrieves and displays live data and parameters from the vehicle's ECU.
Views the results of On-Board Monitor tests.
Enables bi-directional control of the ECM for system testing.
Displays vehicle identification number, calibration details, etc.
Checks the current condition of the vehicle, including MIL status.
Procedures for safely exiting the diagnostics application.
Resets the Engine Oil Life system after an oil change.
Maintains the electronic braking system safely and effectively.
Safety precautions for performing EPB system maintenance.
Calibrates the steering angle sensor after specific repairs.
Evaluates battery charge state, monitors current, and registers replacement.
Resets battery replacement information and informs the power management system.
Calibrates the steering angle sensor and stores vehicle identification.
Activates the Steering Wheel Heating function directly from the CEM.
Performs functions for the Diesel Particulate Filter system.
Resets the counter for the Diesel Particulate Filter after replacement.
Describes the navigation and control elements of the update screen.
Explains the status bar displaying device info and update progress.
Details vehicle logos, version info, and update status buttons.
Guides on updating diagnostic software and TPMS service software.
Allows adjustment of the measurement unit for the diagnostic system.
Allows adjustment of the display language for the MaxiIM system.
Configures the device for printing data via Wi-Fi connection.
Enables or disables the notification center for system updates.
Configures automatic updates for the OS, MaxiIM system, and vehicle software.
Provides information about the MaxiIM diagnostic device.
Accesses Android system settings for wireless, networks, and device configuration.
Guides on receiving remote support from Autel or other users.
Explains the operations controlled through the data manager toolbar.
Contains and allows viewing of captured screenshot images.
Details the functions of toolbar buttons for image file management.
Stores and displays PDF files of saved data.
Allows playback of recorded data frames from live data streams.
Manages and uninstalls firmware applications on the diagnostic system.
Launches the support platform to view data loggings.
Stores records of test vehicle history, including diagnostic sessions.
Provides a detailed data form of tested vehicles and retrieved DTCs.
Allows editing and saving detailed workshop information for reports.
Allows creation and organization of customer accounts.
Steps to create a new customer account in the Shop Manager.
Steps to edit an existing customer account's information.
Steps to delete a customer account from the system.
Allows adding audio, video, and text notes to customer accounts.
Describes the three connection modes available for selection.
Displays device types and serial numbers for pairing.
Steps to pair the MaxiFlash with the tablet via Bluetooth.
Checks for and performs VCI software updates via the internet.
Shows how to maintain devices and precautions to take.
Provides solutions for common issues when the tablet does not work properly.
Explains the features and best practices for using the built-in Lithium-ion Polymer battery.
States compliance with FCC rules and Industry Canada's license-exempt RSSs.
Outlines the terms and conditions of the one-year limited warranty.
