EasyManua.ls Logo

Autel MaxiDAS DS708 User Manual

Autel MaxiDAS DS708
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the MaxiDAS, read this
instruction manual first and observe the following safety precautions at a
minimum whenever working on a vehicle:
z Always keep attentive while driving.
z Always perform testing or repairing in a safe environment. Wear safety eye
protection that meets ANSI standards.
z Keep clothing, hair, hands, tools, test equipments, etc. away from all moving or
hot engine parts.
z Operate the vehicle in a well ventilated work area. Exhaust gases are poisonous.
z Put blocks in front of the drive wheels and never leave the vehicle unattended
while testing or repairing.
z Use extreme caution when working around the ignition coil, distributor cap,
ignition wires and spark plugs. These components create hazardous voltages
when the engine is running.
z Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
z Put the transmission in PARK (for automatic transmission) or NEUTRAL (for
manual transmission) and make sure the parking brake is engaged.
z Refer to the user’s manual for the vehicle being serviced and adhere to all
diagnostic procedures and precautions. Otherwise personal injury or unneeded
repairs may result.
z DO NOT mount the MaxiDAS in a position which can obstruct the view of the
driver.
z DO NOT use the MaxiDAS and drive the vehicle at the same time. Any
distractions may cause an accident.
z DO NOT mount the MaxiDAS in a position which could cause it to be propelled
through the vehicle during an accident causing injury, such as over or near an
airbag.
z DO NOT route the cable in a position which would interfere with the operation of
the vehicle controls.
z DO NOT connect or disconnect any test equipment while the ignition is on or the
engine is running. Failure to so could result in control unit damage.
z Keep the MaxiDAS dry, clean, free from oil/water or grease. Use a mild detergent
on a clean cloth to clean the outside of the MaxiDAS when necessary.

Other manuals for Autel MaxiDAS DS708

Question and Answer IconNeed help?

Do you have a question about the Autel MaxiDAS DS708 and is the answer not in the manual?

Autel MaxiDAS DS708 Specifications

General IconGeneral
Operating SystemWindows CE
ConnectivityUSB, Ethernet
UpdatesOnline updates
Display7-inch LCD touch screen
ProtocolsISO15765, CAN
Power Supply12V DC
BatteryRechargeable lithium battery
Wireless ConnectivityWi-Fi
Diagnostic Functionsadaptations
LanguagesMultilingual support

Summary

Safety Precautions and Warnings

Component Descriptions

Chapter 3 Setup

Insert the Memory Card

Instructions for properly inserting the SD memory card into the device.

Connect Hardware and Power

Steps for connecting the hardware model and power supply for operation.

Chapter 4 Scan Diagnostics Applications

Connect to the Vehicle

Instructions for connecting the scan tool to the vehicle's data link connector (DLC).

Identifying the Vehicle

Procedures for identifying the vehicle being diagnosed using VIN or manual selection.

Diagnose the Vehicle

Explains various diagnostic functions available for vehicle testing and analysis.

Chapter 5 Auto Scan (HONDA)

Chapter 6 Diagnostic Trouble Codes (VOLVO/ OBDII)

Read Codes

Explains how to read stored and pending trouble codes from the vehicle's ECU.

Erase Codes

Provides instructions for erasing diagnostic trouble codes from the vehicle.

Chapter 7 Live Data (OBDII)

Live Data Viewing Options

Describes options for viewing live data, including complete list, graph, and analog formats.

Chapter 8 Freeze Frame

View Freeze Frame Data

Instructions on how to access and view freeze frame data captured during fault events.

Chapter 9 Component Test (OBDII Only)

Chapter 10 I/M Readiness (OBDII Only)

Chapter 11 O2 Mon. Test (O2 Monitor Test) (OBDII Only)

Chapter 12 On-Board Mon. Test <OBDII>

Chapter 14 DTC Lookup

Chapter 17 System Setup

Chapter 18 Power off

Related product manuals