Autel MaxiLink ML519 User Manual

Email: sales@autel.com
Web: www.autel.com
MaxiLink ML519
Getting Started
Connect the OBD II cable’ s 16-pin male adapter to the
Vehicle’s DLC which is generally located under the vehicle
dash.
The device will be automatically powered up.
1 2
3 4
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully. Use this unit
correctly and properly. Failure to do so may cause damage and/or personal injury and will void the product
warranty.
Your MaxiLink ML519 is now ready to work.
Connect the OBD II cable’s female adapter to the MaxiLink
ML519
Tighten the captive screws.
Scan QR Code to visit our website at www.autel.com.
Create an Autel ID and register the product with device’s
SN and password.
Thank you for purchasing AUTEL tool. Manufactured to a high standard, our tool will, if used according to these
instructions and properly maintained, give you years of trouble-free performance.
Quick Reference Guide

Autel MaxiLink ML519 Specifications

General

Connectivity	USB
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Display	2.8 inch color display
Compatibility	OBDII compliant vehicles
Functions	Read and clear codes, live data, freeze frame
Power	12V DC from vehicle battery
Supported Protocols	J1850 VPW, J1850 PWM, ISO9141, KWP2000, CAN
Languages	English, Spanish, French

Summary

Getting Started

Scan QR Code and Register

Visit the Autel website via QR code, create an Autel ID, and register the product with its SN and password.

Connect OBD II Cable

Connect the OBD II cable's female adapter to the MaxiLink ML519 and tighten the captive screws.

Connect to Vehicle

Connect the OBD II cable's 16-pin male adapter to the vehicle's DLC, typically under the dash. The device will power up.

Device Ready

Confirm that your MaxiLink ML519 is now ready to work after connecting to the vehicle.

Software Update and Delete

Prepare for Update

Run the Maxi PC Suite, connect the device via USB, and select update mode.

Install Software Updates

In the update window, select the appropriate files to install.

Data Printing